Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine

783.90 $
Go to store
This product is no longer for sale, see similar items
Link copied to clipboard, share it
Or send it to social networks

Price dropped by 9.78 $

Lower than average, a bit
-1%

Reliable seller: 89%

Above average, safe to buy, HCZ Hauser's laser Store

  • More than 11 years of seller experience
  • High general feedback score (2660)
  • Customers are satisfied by communication
  • Items match description
  • High shipping speed
  • 3.9% of customers were dissatisfied over the last 3 months

Customer reviews

A

A***B

Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - From the machine and did not expect something special, simple electronics, for the hobby will come. At the delivery, the box flew, the support of the table adjustment jumped inside, curled pulled no problem. It is very very very long, and very long, and very long, it is very very long, and very long, it is very very long, and it is, it is very very long, and it is, it is, it is, it is, it is, it is, it is, it is, it is, it is, it is, and it is, it is, and it is, and it is, it is, and it is very very very very Scotch)))) cooling is not necessarily just water, I put frozen bottles into the water. The air pump is weak, it is not critical, but for a better result it is necessary to change. The tractor body. Paid the seller for Customs sent 1.5 weeks. Probably arranged, delivery to Moscow for 3 weeks, to the House did not bring had to go 19km Moscow, there warehouse, to go to the car can not, the box is huge, let's say 500R for 50 meters. Next came another line says let's 300R for unloading. No papers nothing. In general delivery ahtung be ready. In general, except for the delivery is more and less Dear friend, it is caused by long delivery, a little worn out, sorry for it please tighten them, may be OK to adjust the light way, you can leave me your email address, I will send to you
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - From the machine and did not expect something special, simple electronics, for the hobby will come. At the delivery, the box flew, the support of the table adjustment jumped inside, curled pulled no problem. It is very very very long, and very long, and very long, it is very very long, and very long, it is very very long, and it is, it is very very long, and it is, it is, it is, it is, it is, it is, it is, it is, it is, it is, it is, and it is, it is, and it is, and it is, it is, and it is very very very very Scotch)))) cooling is not necessarily just water, I put frozen bottles into the water. The air pump is weak, it is not critical, but for a better result it is necessary to change. The tractor body. Paid the seller for Customs sent 1.5 weeks. Probably arranged, delivery to Moscow for 3 weeks, to the House did not bring had to go 19km Moscow, there warehouse, to go to the car can not, the box is huge, let's say 500R for 50 meters. Next came another line says let's 300R for unloading. No papers nothing. In general delivery ahtung be ready. In general, except for the delivery is more and less Dear friend, it is caused by long delivery, a little worn out, sorry for it please tighten them, may be OK to adjust the light way, you can leave me your email address, I will send to you
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - From the machine and did not expect something special, simple electronics, for the hobby will come. At the delivery, the box flew, the support of the table adjustment jumped inside, curled pulled no problem. It is very very very long, and very long, and very long, it is very very long, and very long, it is very very long, and it is, it is very very long, and it is, it is, it is, it is, it is, it is, it is, it is, it is, it is, it is, and it is, it is, and it is, and it is, it is, and it is very very very very Scotch)))) cooling is not necessarily just water, I put frozen bottles into the water. The air pump is weak, it is not critical, but for a better result it is necessary to change. The tractor body. Paid the seller for Customs sent 1.5 weeks. Probably arranged, delivery to Moscow for 3 weeks, to the House did not bring had to go 19km Moscow, there warehouse, to go to the car can not, the box is huge, let's say 500R for 50 meters. Next came another line says let's 300R for unloading. No papers nothing. In general delivery ahtung be ready. In general, except for the delivery is more and less Dear friend, it is caused by long delivery, a little worn out, sorry for it please tighten them, may be OK to adjust the light way, you can leave me your email address, I will send to you
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - From the machine and did not expect something special, simple electronics, for the hobby will come. At the delivery, the box flew, the support of the table adjustment jumped inside, curled pulled no problem. It is very very very long, and very long, and very long, it is very very long, and very long, it is very very long, and it is, it is very very long, and it is, it is, it is, it is, it is, it is, it is, it is, it is, it is, it is, and it is, it is, and it is, and it is, it is, and it is very very very very Scotch)))) cooling is not necessarily just water, I put frozen bottles into the water. The air pump is weak, it is not critical, but for a better result it is necessary to change. The tractor body. Paid the seller for Customs sent 1.5 weeks. Probably arranged, delivery to Moscow for 3 weeks, to the House did not bring had to go 19km Moscow, there warehouse, to go to the car can not, the box is huge, let's say 500R for 50 meters. Next came another line says let's 300R for unloading. No papers nothing. In general delivery ahtung be ready. In general, except for the delivery is more and less Dear friend, it is caused by long delivery, a little worn out, sorry for it please tighten them, may be OK to adjust the light way, you can leave me your email address, I will send to you
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - From the machine and did not expect something special, simple electronics, for the hobby will come. At the delivery, the box flew, the support of the table adjustment jumped inside, curled pulled no problem. It is very very very long, and very long, and very long, it is very very long, and very long, it is very very long, and it is, it is very very long, and it is, it is, it is, it is, it is, it is, it is, it is, it is, it is, it is, and it is, it is, and it is, and it is, it is, and it is very very very very Scotch)))) cooling is not necessarily just water, I put frozen bottles into the water. The air pump is weak, it is not critical, but for a better result it is necessary to change. The tractor body. Paid the seller for Customs sent 1.5 weeks. Probably arranged, delivery to Moscow for 3 weeks, to the House did not bring had to go 19km Moscow, there warehouse, to go to the car can not, the box is huge, let's say 500R for 50 meters. Next came another line says let's 300R for unloading. No papers nothing. In general delivery ahtung be ready. In general, except for the delivery is more and less Dear friend, it is caused by long delivery, a little worn out, sorry for it please tighten them, may be OK to adjust the light way, you can leave me your email address, I will send to you
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - From the machine and did not expect something special, simple electronics, for the hobby will come. At the delivery, the box flew, the support of the table adjustment jumped inside, curled pulled no problem. It is very very very long, and very long, and very long, it is very very long, and very long, it is very very long, and it is, it is very very long, and it is, it is, it is, it is, it is, it is, it is, it is, it is, it is, it is, and it is, it is, and it is, and it is, it is, and it is very very very very Scotch)))) cooling is not necessarily just water, I put frozen bottles into the water. The air pump is weak, it is not critical, but for a better result it is necessary to change. The tractor body. Paid the seller for Customs sent 1.5 weeks. Probably arranged, delivery to Moscow for 3 weeks, to the House did not bring had to go 19km Moscow, there warehouse, to go to the car can not, the box is huge, let's say 500R for 50 meters. Next came another line says let's 300R for unloading. No papers nothing. In general delivery ahtung be ready. In general, except for the delivery is more and less Dear friend, it is caused by long delivery, a little worn out, sorry for it please tighten them, may be OK to adjust the light way, you can leave me your email address, I will send to you
From the machine and did not expect something special, simple electronics, for the hobby will come. At the delivery, the box flew, the support of the table adjustment jumped inside, curled pulled no problem. It is very very very long, and very long, and very long, it is very very long, and very long, it is very very long, and it is, it is very very long, and it is, it is, it is, it is, it is, it is, it is, it is, it is, it is, it is, and it is, it is, and it is, and it is, it is, and it is very very very very Scotch)))) cooling is not necessarily just water, I put frozen bottles into the water. The air pump is weak, it is not critical, but for a better result it is necessary to change. The tractor body. Paid the seller for Customs sent 1.5 weeks. Probably arranged, delivery to Moscow for 3 weeks, to the House did not bring had to go 19km Moscow, there warehouse, to go to the car can not, the box is huge, let's say 500R for 50 meters. Next came another line says let's 300R for unloading. No papers nothing. In general delivery ahtung be ready. In general, except for the delivery is more and less Dear friend, it is caused by long delivery, a little worn out, sorry for it please tighten them, may be OK to adjust the light way, you can leave me your email address, I will send to you
May 23, 2018
D

D***v

Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The order came in a month. Taken at the Golden Gate (Moscow). The track wasn't tracked at all. Pick up on the same day did not work and had to pay for storage 500 rubles. The sending itself is still paid. Free to the seaport and customs clearance at the expense of the buyer. So to the machine another 160 dollars for delivery. Packed well. I was afraid of the phone, but it was all. In an hour, all turned on and tried. It works. The seller quickly responded to all questions. It was a little difficult to understand the "representative" of the cargo company, but generally tolerant. Strangely enough, even the document was not asked. Of the shortcomings, one leg is not fixed. The bolts in the box were hanging, but no nuts. Maybe they fell into the hole that this leg punched in the drawer. I haven't found other problems yet. In general, I am happy with the purchase. The device corresponds to the stated characteristics.
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The order came in a month. Taken at the Golden Gate (Moscow). The track wasn't tracked at all. Pick up on the same day did not work and had to pay for storage 500 rubles. The sending itself is still paid. Free to the seaport and customs clearance at the expense of the buyer. So to the machine another 160 dollars for delivery. Packed well. I was afraid of the phone, but it was all. In an hour, all turned on and tried. It works. The seller quickly responded to all questions. It was a little difficult to understand the "representative" of the cargo company, but generally tolerant. Strangely enough, even the document was not asked. Of the shortcomings, one leg is not fixed. The bolts in the box were hanging, but no nuts. Maybe they fell into the hole that this leg punched in the drawer. I haven't found other problems yet. In general, I am happy with the purchase. The device corresponds to the stated characteristics.
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The order came in a month. Taken at the Golden Gate (Moscow). The track wasn't tracked at all. Pick up on the same day did not work and had to pay for storage 500 rubles. The sending itself is still paid. Free to the seaport and customs clearance at the expense of the buyer. So to the machine another 160 dollars for delivery. Packed well. I was afraid of the phone, but it was all. In an hour, all turned on and tried. It works. The seller quickly responded to all questions. It was a little difficult to understand the "representative" of the cargo company, but generally tolerant. Strangely enough, even the document was not asked. Of the shortcomings, one leg is not fixed. The bolts in the box were hanging, but no nuts. Maybe they fell into the hole that this leg punched in the drawer. I haven't found other problems yet. In general, I am happy with the purchase. The device corresponds to the stated characteristics.
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The order came in a month. Taken at the Golden Gate (Moscow). The track wasn't tracked at all. Pick up on the same day did not work and had to pay for storage 500 rubles. The sending itself is still paid. Free to the seaport and customs clearance at the expense of the buyer. So to the machine another 160 dollars for delivery. Packed well. I was afraid of the phone, but it was all. In an hour, all turned on and tried. It works. The seller quickly responded to all questions. It was a little difficult to understand the "representative" of the cargo company, but generally tolerant. Strangely enough, even the document was not asked. Of the shortcomings, one leg is not fixed. The bolts in the box were hanging, but no nuts. Maybe they fell into the hole that this leg punched in the drawer. I haven't found other problems yet. In general, I am happy with the purchase. The device corresponds to the stated characteristics.
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The order came in a month. Taken at the Golden Gate (Moscow). The track wasn't tracked at all. Pick up on the same day did not work and had to pay for storage 500 rubles. The sending itself is still paid. Free to the seaport and customs clearance at the expense of the buyer. So to the machine another 160 dollars for delivery. Packed well. I was afraid of the phone, but it was all. In an hour, all turned on and tried. It works. The seller quickly responded to all questions. It was a little difficult to understand the "representative" of the cargo company, but generally tolerant. Strangely enough, even the document was not asked. Of the shortcomings, one leg is not fixed. The bolts in the box were hanging, but no nuts. Maybe they fell into the hole that this leg punched in the drawer. I haven't found other problems yet. In general, I am happy with the purchase. The device corresponds to the stated characteristics.
The order came in a month. Taken at the Golden Gate (Moscow). The track wasn't tracked at all. Pick up on the same day did not work and had to pay for storage 500 rubles. The sending itself is still paid. Free to the seaport and customs clearance at the expense of the buyer. So to the machine another 160 dollars for delivery. Packed well. I was afraid of the phone, but it was all. In an hour, all turned on and tried. It works. The seller quickly responded to all questions. It was a little difficult to understand the "representative" of the cargo company, but generally tolerant. Strangely enough, even the document was not asked. Of the shortcomings, one leg is not fixed. The bolts in the box were hanging, but no nuts. Maybe they fell into the hole that this leg punched in the drawer. I haven't found other problems yet. In general, I am happy with the purchase. The device corresponds to the stated characteristics.
July 19, 2017
V

V***s

Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - Machine seller sent 2 weeks. The machine ordered on January 3, received on March 15. The machine went to receive to the port of Riga they took with me 301 € port fees (robbers) + 180 € taxes to our state and a day at the computer issuing an import declaration. The machine works! but there were also drawbacks LED driver was not glued, the power supply scratched and damaged the seal but the seller assured that it is new! There was one problem more seriously on the power supply "test" button hit because of this machine burned where it is not necessary, the seller tried to help but all his advice did not fit in the end I fixed the button so that it spontaneously did not press from any light "push (hit) Machine". All defects can be seen in the photo. In general, the purchase is satisfied with 5 stars only for the sociability of the seller and attempts to help, otherwise it would take 4 stars.
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - Machine seller sent 2 weeks. The machine ordered on January 3, received on March 15. The machine went to receive to the port of Riga they took with me 301 € port fees (robbers) + 180 € taxes to our state and a day at the computer issuing an import declaration. The machine works! but there were also drawbacks LED driver was not glued, the power supply scratched and damaged the seal but the seller assured that it is new! There was one problem more seriously on the power supply "test" button hit because of this machine burned where it is not necessary, the seller tried to help but all his advice did not fit in the end I fixed the button so that it spontaneously did not press from any light "push (hit) Machine". All defects can be seen in the photo. In general, the purchase is satisfied with 5 stars only for the sociability of the seller and attempts to help, otherwise it would take 4 stars.
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - Machine seller sent 2 weeks. The machine ordered on January 3, received on March 15. The machine went to receive to the port of Riga they took with me 301 € port fees (robbers) + 180 € taxes to our state and a day at the computer issuing an import declaration. The machine works! but there were also drawbacks LED driver was not glued, the power supply scratched and damaged the seal but the seller assured that it is new! There was one problem more seriously on the power supply "test" button hit because of this machine burned where it is not necessary, the seller tried to help but all his advice did not fit in the end I fixed the button so that it spontaneously did not press from any light "push (hit) Machine". All defects can be seen in the photo. In general, the purchase is satisfied with 5 stars only for the sociability of the seller and attempts to help, otherwise it would take 4 stars.
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - Machine seller sent 2 weeks. The machine ordered on January 3, received on March 15. The machine went to receive to the port of Riga they took with me 301 € port fees (robbers) + 180 € taxes to our state and a day at the computer issuing an import declaration. The machine works! but there were also drawbacks LED driver was not glued, the power supply scratched and damaged the seal but the seller assured that it is new! There was one problem more seriously on the power supply "test" button hit because of this machine burned where it is not necessary, the seller tried to help but all his advice did not fit in the end I fixed the button so that it spontaneously did not press from any light "push (hit) Machine". All defects can be seen in the photo. In general, the purchase is satisfied with 5 stars only for the sociability of the seller and attempts to help, otherwise it would take 4 stars.
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - Machine seller sent 2 weeks. The machine ordered on January 3, received on March 15. The machine went to receive to the port of Riga they took with me 301 € port fees (robbers) + 180 € taxes to our state and a day at the computer issuing an import declaration. The machine works! but there were also drawbacks LED driver was not glued, the power supply scratched and damaged the seal but the seller assured that it is new! There was one problem more seriously on the power supply "test" button hit because of this machine burned where it is not necessary, the seller tried to help but all his advice did not fit in the end I fixed the button so that it spontaneously did not press from any light "push (hit) Machine". All defects can be seen in the photo. In general, the purchase is satisfied with 5 stars only for the sociability of the seller and attempts to help, otherwise it would take 4 stars.
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - Machine seller sent 2 weeks. The machine ordered on January 3, received on March 15. The machine went to receive to the port of Riga they took with me 301 € port fees (robbers) + 180 € taxes to our state and a day at the computer issuing an import declaration. The machine works! but there were also drawbacks LED driver was not glued, the power supply scratched and damaged the seal but the seller assured that it is new! There was one problem more seriously on the power supply "test" button hit because of this machine burned where it is not necessary, the seller tried to help but all his advice did not fit in the end I fixed the button so that it spontaneously did not press from any light "push (hit) Machine". All defects can be seen in the photo. In general, the purchase is satisfied with 5 stars only for the sociability of the seller and attempts to help, otherwise it would take 4 stars.
Machine seller sent 2 weeks. The machine ordered on January 3, received on March 15. The machine went to receive to the port of Riga they took with me 301 € port fees (robbers) + 180 € taxes to our state and a day at the computer issuing an import declaration. The machine works! but there were also drawbacks LED driver was not glued, the power supply scratched and damaged the seal but the seller assured that it is new! There was one problem more seriously on the power supply "test" button hit because of this machine burned where it is not necessary, the seller tried to help but all his advice did not fit in the end I fixed the button so that it spontaneously did not press from any light "push (hit) Machine". All defects can be seen in the photo. In general, the purchase is satisfied with 5 stars only for the sociability of the seller and attempts to help, otherwise it would take 4 stars.
April 24, 2018
S

S***v

Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - March 22, 2018 Paid, April 27, 2018 Arrived in Krasnodar (I consider not a bad result). All arrangements related to the delivery were fulfilled by the seller in full. The unit itself has not started yet (I will rewrite later), but there are no visible damage. Took with the rotary device. Communicable seller, answered all my questions at once and at any time of the day. I advise you! P. S. Yes, different read reviews, about different shortcomings, but the cost, good attitude of the seller and the opportunity not to think about different papers when delivering, overlapping the cons, especially, it is necessary to be naive, that would wait for such an assembly in perfect condition, given thousands of kilometers of way and "traditions" ;) our carriers. And we don't do them at all.
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - March 22, 2018 Paid, April 27, 2018 Arrived in Krasnodar (I consider not a bad result). All arrangements related to the delivery were fulfilled by the seller in full. The unit itself has not started yet (I will rewrite later), but there are no visible damage. Took with the rotary device. Communicable seller, answered all my questions at once and at any time of the day. I advise you! P. S. Yes, different read reviews, about different shortcomings, but the cost, good attitude of the seller and the opportunity not to think about different papers when delivering, overlapping the cons, especially, it is necessary to be naive, that would wait for such an assembly in perfect condition, given thousands of kilometers of way and "traditions" ;) our carriers. And we don't do them at all.
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - March 22, 2018 Paid, April 27, 2018 Arrived in Krasnodar (I consider not a bad result). All arrangements related to the delivery were fulfilled by the seller in full. The unit itself has not started yet (I will rewrite later), but there are no visible damage. Took with the rotary device. Communicable seller, answered all my questions at once and at any time of the day. I advise you! P. S. Yes, different read reviews, about different shortcomings, but the cost, good attitude of the seller and the opportunity not to think about different papers when delivering, overlapping the cons, especially, it is necessary to be naive, that would wait for such an assembly in perfect condition, given thousands of kilometers of way and "traditions" ;) our carriers. And we don't do them at all.
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - March 22, 2018 Paid, April 27, 2018 Arrived in Krasnodar (I consider not a bad result). All arrangements related to the delivery were fulfilled by the seller in full. The unit itself has not started yet (I will rewrite later), but there are no visible damage. Took with the rotary device. Communicable seller, answered all my questions at once and at any time of the day. I advise you! P. S. Yes, different read reviews, about different shortcomings, but the cost, good attitude of the seller and the opportunity not to think about different papers when delivering, overlapping the cons, especially, it is necessary to be naive, that would wait for such an assembly in perfect condition, given thousands of kilometers of way and "traditions" ;) our carriers. And we don't do them at all.
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - March 22, 2018 Paid, April 27, 2018 Arrived in Krasnodar (I consider not a bad result). All arrangements related to the delivery were fulfilled by the seller in full. The unit itself has not started yet (I will rewrite later), but there are no visible damage. Took with the rotary device. Communicable seller, answered all my questions at once and at any time of the day. I advise you! P. S. Yes, different read reviews, about different shortcomings, but the cost, good attitude of the seller and the opportunity not to think about different papers when delivering, overlapping the cons, especially, it is necessary to be naive, that would wait for such an assembly in perfect condition, given thousands of kilometers of way and "traditions" ;) our carriers. And we don't do them at all.
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - March 22, 2018 Paid, April 27, 2018 Arrived in Krasnodar (I consider not a bad result). All arrangements related to the delivery were fulfilled by the seller in full. The unit itself has not started yet (I will rewrite later), but there are no visible damage. Took with the rotary device. Communicable seller, answered all my questions at once and at any time of the day. I advise you! P. S. Yes, different read reviews, about different shortcomings, but the cost, good attitude of the seller and the opportunity not to think about different papers when delivering, overlapping the cons, especially, it is necessary to be naive, that would wait for such an assembly in perfect condition, given thousands of kilometers of way and "traditions" ;) our carriers. And we don't do them at all.
March 22, 2018 Paid, April 27, 2018 Arrived in Krasnodar (I consider not a bad result). All arrangements related to the delivery were fulfilled by the seller in full. The unit itself has not started yet (I will rewrite later), but there are no visible damage. Took with the rotary device. Communicable seller, answered all my questions at once and at any time of the day. I advise you! P. S. Yes, different read reviews, about different shortcomings, but the cost, good attitude of the seller and the opportunity not to think about different papers when delivering, overlapping the cons, especially, it is necessary to be naive, that would wait for such an assembly in perfect condition, given thousands of kilometers of way and "traditions" ;) our carriers. And we don't do them at all.
May 03, 2018
V

V***v

Reached Vladivostok in about 1,5 months. For dope. The seller himself arranged the shipping, customs, all kinds of DOP payments and so on. Packed well, in plywood box with foam gasket. The package is complete, everything is working. Wishes: instead of CD, put the USB flash drive. I don't have a CD player on any computer. The truth should be paid tribute, the seller immediately responded and sent everything to the Mail. And yet would not interfere with detailed instructions on connecting the machine to the PC. Namely, specify that in the program you need to enter the code, which is on the sticker on the board inside the machine. Well, in general, it's all right for the moment. Let's see.
July 25, 2018
M

M***y

The first impressions were not very. No protective glass (just transparent scratched plastic), sealing the walls blades hood fan, the absence of any installation and operation instructions (but the seller then sent it), falling sockets on the back wall. And a curved defrost Software (now it would be b2k18 to use discs, Karl!). Corel had to put himself. Despite shortcomings, after the first inclusion of joy there was no limit =) in general norms, but it could have been better. But it's China, and the price is not 150, as in the Russian Federation...
August 09, 2018
E

E***v

The machine arrived in Yaroslavl in 26 days by yellow expedition, the condition of packaging and machine is excellent. Upon receipt did not pay for anything, the seller paid the braking independently. Everything is in perfect condition, installed, started, the only thing you need to adjust the mirrors. But I don't think that's a problem. The seller was always in touch, although the order was not tracked. I really advise you, Alan, good. I plan to order another rotary axis.
April 30, 2018
M

M***r

The machine went ~ 2 months, together with it separately ordered clearance ~ 20 tr. Came to the warehouse of zde. They called from the warehouse about the parcel. They came open, inspected, the top plexiglass was sold, the packaging was flimsy. Otherwise everything is fine. They took it. In the work checked with the move, the engraving is clearly, cutting as if weak. It was necessary to adjust the mirrors. After adjustment, everything is fine!
April 02, 2019
S

S***a

Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - Ordered 12.02.19. To the amur region, 17 thousand. For shipping. The goods can only be tracked when it gets into the goods. Transport company. Throughout russia passed for 16d. Due to the holidays 1.5 months delivery. The supplier answers all questions. The first photo of the rake curve. But there were no problems to adjust. The supplier was asked for instructions, without problems threw off on electronics. Order do not be afraid.
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - Ordered 12.02.19. To the amur region, 17 thousand. For shipping. The goods can only be tracked when it gets into the goods. Transport company. Throughout russia passed for 16d. Due to the holidays 1.5 months delivery. The supplier answers all questions. The first photo of the rake curve. But there were no problems to adjust. The supplier was asked for instructions, without problems threw off on electronics. Order do not be afraid.
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - Ordered 12.02.19. To the amur region, 17 thousand. For shipping. The goods can only be tracked when it gets into the goods. Transport company. Throughout russia passed for 16d. Due to the holidays 1.5 months delivery. The supplier answers all questions. The first photo of the rake curve. But there were no problems to adjust. The supplier was asked for instructions, without problems threw off on electronics. Order do not be afraid.
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - Ordered 12.02.19. To the amur region, 17 thousand. For shipping. The goods can only be tracked when it gets into the goods. Transport company. Throughout russia passed for 16d. Due to the holidays 1.5 months delivery. The supplier answers all questions. The first photo of the rake curve. But there were no problems to adjust. The supplier was asked for instructions, without problems threw off on electronics. Order do not be afraid.
Ordered 12.02.19. To the amur region, 17 thousand. For shipping. The goods can only be tracked when it gets into the goods. Transport company. Throughout russia passed for 16d. Due to the holidays 1.5 months delivery. The supplier answers all questions. The first photo of the rake curve. But there were no problems to adjust. The supplier was asked for instructions, without problems threw off on electronics. Order do not be afraid.
March 10, 2019
p

p***v

The goods came before the specified time, the packing without damage, the machine itself is packed well, it came as from the Conver, without a single scratch, connected without a problem, although all the instruction in Chinese)))))) the seller always answered all questions within 5-10 minutes, there were no delays, In general, I want to say that I plan to work with this seller in the future, and I advise you all too ...........
February 06, 2018
A

A***a

First i want to note the seller. Attentive, answers always quickly, there was a hitch on delivery in russia geldor, decided all the questions quickly and promptly! Thank you very much, alan. I advise the seller as one of the best on the site. On the machine-packed qualitatively, the machine without scratches, chips, and other things. Visually everything is intact, the other day i will connect and add feedback photos
April 09, 2019
A

A***n

Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The light does not work! The shafts on the elevator profrar curves the working field! Lenses and mirrors in terrible condition! Skin 1,5 does not cut at all! Compressor on the trash! Poppa on the trash! Short of crap! I do not advise to buy! He's fucked up! No compensation no replacement anything not received! AliExpress dispute ended in favor of the seller! People do not buy from them nothing!!!!!
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The light does not work! The shafts on the elevator profrar curves the working field! Lenses and mirrors in terrible condition! Skin 1,5 does not cut at all! Compressor on the trash! Poppa on the trash! Short of crap! I do not advise to buy! He's fucked up! No compensation no replacement anything not received! AliExpress dispute ended in favor of the seller! People do not buy from them nothing!!!!!
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The light does not work! The shafts on the elevator profrar curves the working field! Lenses and mirrors in terrible condition! Skin 1,5 does not cut at all! Compressor on the trash! Poppa on the trash! Short of crap! I do not advise to buy! He's fucked up! No compensation no replacement anything not received! AliExpress dispute ended in favor of the seller! People do not buy from them nothing!!!!!
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The light does not work! The shafts on the elevator profrar curves the working field! Lenses and mirrors in terrible condition! Skin 1,5 does not cut at all! Compressor on the trash! Poppa on the trash! Short of crap! I do not advise to buy! He's fucked up! No compensation no replacement anything not received! AliExpress dispute ended in favor of the seller! People do not buy from them nothing!!!!!
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The light does not work! The shafts on the elevator profrar curves the working field! Lenses and mirrors in terrible condition! Skin 1,5 does not cut at all! Compressor on the trash! Poppa on the trash! Short of crap! I do not advise to buy! He's fucked up! No compensation no replacement anything not received! AliExpress dispute ended in favor of the seller! People do not buy from them nothing!!!!!
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The light does not work! The shafts on the elevator profrar curves the working field! Lenses and mirrors in terrible condition! Skin 1,5 does not cut at all! Compressor on the trash! Poppa on the trash! Short of crap! I do not advise to buy! He's fucked up! No compensation no replacement anything not received! AliExpress dispute ended in favor of the seller! People do not buy from them nothing!!!!!
The light does not work! The shafts on the elevator profrar curves the working field! Lenses and mirrors in terrible condition! Skin 1,5 does not cut at all! Compressor on the trash! Poppa on the trash! Short of crap! I do not advise to buy! He's fucked up! No compensation no replacement anything not received! AliExpress dispute ended in favor of the seller! People do not buy from them nothing!!!!!
May 11, 2018
I

I***o

Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - All Super! The first month of tracking was not, but when the machine came to Russia, the tracking appeared through the railway site. The machine works right! Put, connected and immediately works!) plywood 3mm, cut for 1 passage. Brains asked Ruida to pay for them separately. Also for an additional fee, the seller himself made the recovery. In general I advise!
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - All Super! The first month of tracking was not, but when the machine came to Russia, the tracking appeared through the railway site. The machine works right! Put, connected and immediately works!) plywood 3mm, cut for 1 passage. Brains asked Ruida to pay for them separately. Also for an additional fee, the seller himself made the recovery. In general I advise!
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - All Super! The first month of tracking was not, but when the machine came to Russia, the tracking appeared through the railway site. The machine works right! Put, connected and immediately works!) plywood 3mm, cut for 1 passage. Brains asked Ruida to pay for them separately. Also for an additional fee, the seller himself made the recovery. In general I advise!
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - All Super! The first month of tracking was not, but when the machine came to Russia, the tracking appeared through the railway site. The machine works right! Put, connected and immediately works!) plywood 3mm, cut for 1 passage. Brains asked Ruida to pay for them separately. Also for an additional fee, the seller himself made the recovery. In general I advise!
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - All Super! The first month of tracking was not, but when the machine came to Russia, the tracking appeared through the railway site. The machine works right! Put, connected and immediately works!) plywood 3mm, cut for 1 passage. Brains asked Ruida to pay for them separately. Also for an additional fee, the seller himself made the recovery. In general I advise!
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - All Super! The first month of tracking was not, but when the machine came to Russia, the tracking appeared through the railway site. The machine works right! Put, connected and immediately works!) plywood 3mm, cut for 1 passage. Brains asked Ruida to pay for them separately. Also for an additional fee, the seller himself made the recovery. In general I advise!
All Super! The first month of tracking was not, but when the machine came to Russia, the tracking appeared through the railway site. The machine works right! Put, connected and immediately works!) plywood 3mm, cut for 1 passage. Brains asked Ruida to pay for them separately. Also for an additional fee, the seller himself made the recovery. In general I advise!
February 15, 2019
N

N***a

Got his machine for a month. A very long time in Russia because of the snowfall, but it is not the seller's fault. Packed well, everything is done neatly. I'm not lucky to have a laser tube cracked when transporting. The seller without any problems compensated the right amount, for which thank him. Answers always, any question is solved. Recommend!!!
February 10, 2018
S

S***a

Everything came intact! The seller was constantly in touch, reported where the cargo was. In Russia went T/K, though I had to take from the terminal, to the House did not bring, and the box is not small. As a mood and try to complement the review and photo works I will add. To the seller special thanks for the help in the clearance!!!
May 18, 2018
J

J***R

Excellent communication with Alan, the seller, very nice machine, but if you are french and intend to buy one NEVER ask shipping by sea beacause it will cost you almost one and a half time the price of the machine to get your parcel out of the seaport on the french side !!! Ask for shipping by DHL
April 09, 2019
V

V***v

The machine was delivered on time, before the entrance. Everything works. Happy with the technique. The machine is worth the money spent. I didn't have to adjust. With the seller you can solve any questions that arise. Respond quickly. The impression that he's not sleeping at all.
June 02, 2017
D

D***k

Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - This is my at least the most expensive but the best purchase on AliExpress. the seller responded quickly, solved all the problems of delivery, the laser came whole, works great. I hope there will be still good reasons for shopping from this seller
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - This is my at least the most expensive but the best purchase on AliExpress. the seller responded quickly, solved all the problems of delivery, the laser came whole, works great. I hope there will be still good reasons for shopping from this seller
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - This is my at least the most expensive but the best purchase on AliExpress. the seller responded quickly, solved all the problems of delivery, the laser came whole, works great. I hope there will be still good reasons for shopping from this seller
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - This is my at least the most expensive but the best purchase on AliExpress. the seller responded quickly, solved all the problems of delivery, the laser came whole, works great. I hope there will be still good reasons for shopping from this seller
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - This is my at least the most expensive but the best purchase on AliExpress. the seller responded quickly, solved all the problems of delivery, the laser came whole, works great. I hope there will be still good reasons for shopping from this seller
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - This is my at least the most expensive but the best purchase on AliExpress. the seller responded quickly, solved all the problems of delivery, the laser came whole, works great. I hope there will be still good reasons for shopping from this seller
This is my at least the most expensive but the best purchase on AliExpress. the seller responded quickly, solved all the problems of delivery, the laser came whole, works great. I hope there will be still good reasons for shopping from this seller
May 16, 2018
A

A***o

Logistics: Seller's Shipping Method

Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - it is trash and seller is mad racist. please, look at other store. naver buy any items at this store. its not free shopping. around $60 for shipping and costom fee $850. i got a not working machine no feedback. open dispute just back $270
it is trash and seller is mad racist. please, look at other store. naver buy any items at this store. its not free shopping. around $60 for shipping and costom fee $850. i got a not working machine no feedback. open dispute just back $270
March 29, 2022
S

S***n

The full-fledged test has not yet been carried out, but at the trial on it did not like that the fan works very noisy, as if a large Luft in the bearings or imbalance, begins to rotate silently, then drastically appears the Goul.
May 21, 2018
I

I***r

Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - From the moment of payment to the receipt of the machine it was 3 months. Quality corresponds to the price. Lufty everywhere, did not work one end. And this at the first check, let's see how it shows itself.
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - From the moment of payment to the receipt of the machine it was 3 months. Quality corresponds to the price. Lufty everywhere, did not work one end. And this at the first check, let's see how it shows itself.
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - From the moment of payment to the receipt of the machine it was 3 months. Quality corresponds to the price. Lufty everywhere, did not work one end. And this at the first check, let's see how it shows itself.
From the moment of payment to the receipt of the machine it was 3 months. Quality corresponds to the price. Lufty everywhere, did not work one end. And this at the first check, let's see how it shows itself.
April 07, 2018
S

S***v

Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The machine came in 28 days! Everything works, everything! The seller sent himself, did not pay anything! It's all possible! Delivery was Baikal service! Packed well! No damage! Order boldly! Recommend!
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The machine came in 28 days! Everything works, everything! The seller sent himself, did not pay anything! It's all possible! Delivery was Baikal service! Packed well! No damage! Order boldly! Recommend!
The machine came in 28 days! Everything works, everything! The seller sent himself, did not pay anything! It's all possible! Delivery was Baikal service! Packed well! No damage! Order boldly! Recommend!
August 16, 2017
V

V***a

Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The machine came quickly all well nothing damaged. The only thing was bent honeycombs during the transshocking and we were not ready for such plugs had to buy eurovillers and rebuild on our sockets.
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The machine came quickly all well nothing damaged. The only thing was bent honeycombs during the transshocking and we were not ready for such plugs had to buy eurovillers and rebuild on our sockets.
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The machine came quickly all well nothing damaged. The only thing was bent honeycombs during the transshocking and we were not ready for such plugs had to buy eurovillers and rebuild on our sockets.
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The machine came quickly all well nothing damaged. The only thing was bent honeycombs during the transshocking and we were not ready for such plugs had to buy eurovillers and rebuild on our sockets.
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The machine came quickly all well nothing damaged. The only thing was bent honeycombs during the transshocking and we were not ready for such plugs had to buy eurovillers and rebuild on our sockets.
The machine came quickly all well nothing damaged. The only thing was bent honeycombs during the transshocking and we were not ready for such plugs had to buy eurovillers and rebuild on our sockets.
November 10, 2017
D

D***n

Very pleased. Packed well. Fully corresponds to the description. Delivery 1 month. The seller is sociable, all the questions are tried to answer. I repeat my purchase with the seller I recommend.
April 13, 2017
O

O***a

The goods went for a month, not tracked. The pump came instead of the specified 35 w, 18 w. Keep in mind when ordering. The glass on the machine is transparent, not as in the photo, red.
June 12, 2019
m

m***e

Hello everyone. I am very pleased. My advice is. This seller and this car is exactly as it was written again. I advise everyone It works very well. I am satisfied..
June 08, 2019
F

F***v

Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - Everything works!!! Sent two weeks, only a couple of months. It's worth it. All Super! There is a separate fee for the delay. Thank you!!!
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - Everything works!!! Sent two weeks, only a couple of months. It's worth it. All Super! There is a separate fee for the delay. Thank you!!!
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - Everything works!!! Sent two weeks, only a couple of months. It's worth it. All Super! There is a separate fee for the delay. Thank you!!!
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - Everything works!!! Sent two weeks, only a couple of months. It's worth it. All Super! There is a separate fee for the delay. Thank you!!!
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - Everything works!!! Sent two weeks, only a couple of months. It's worth it. All Super! There is a separate fee for the delay. Thank you!!!
Everything works!!! Sent two weeks, only a couple of months. It's worth it. All Super! There is a separate fee for the delay. Thank you!!!
April 22, 2018
D

D***a

Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The goods came in two months, the seller arranged everything. Packed was in a wooden box very high quality! Everything's working.
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The goods came in two months, the seller arranged everything. Packed was in a wooden box very high quality! Everything's working.
The goods came in two months, the seller arranged everything. Packed was in a wooden box very high quality! Everything's working.
January 13, 2019
R

R***r

Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The machine came quickly, not tracked, the seller answered all questions, everyone is happy. Rucommando!!
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The machine came quickly, not tracked, the seller answered all questions, everyone is happy. Rucommando!!
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The machine came quickly, not tracked, the seller answered all questions, everyone is happy. Rucommando!!
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The machine came quickly, not tracked, the seller answered all questions, everyone is happy. Rucommando!!
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The machine came quickly, not tracked, the seller answered all questions, everyone is happy. Rucommando!!
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The machine came quickly, not tracked, the seller answered all questions, everyone is happy. Rucommando!!
The machine came quickly, not tracked, the seller answered all questions, everyone is happy. Rucommando!!
January 18, 2018
I

I***v

Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - All right. Safe and safe a month before novosiba arrived! Good seller. But it still had to be corrected.
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - All right. Safe and safe a month before novosiba arrived! Good seller. But it still had to be corrected.
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - All right. Safe and safe a month before novosiba arrived! Good seller. But it still had to be corrected.
All right. Safe and safe a month before novosiba arrived! Good seller. But it still had to be corrected.
November 28, 2017
Y

Y***o

It's fine. Packed very well. The seller quickly answered all questions.
April 28, 2018

Prices at other sellers from 769.23 $

1060 100w Co2 laser engraving machine 1000*600mm 110V/220V cnc laser engraver DIY laser marking machine
1 369 – 1 730 $
1060 100w Co2 laser engraving machine 1000*600mm 110V/220V cnc laser engraver DIY laser marking machine
1decorative imagerating
1decorative imageorder
4.0

Reliability – 89%

Seller HCZ Hauser's laser Store
To the storeGo to store
2022 Newest Free Ship Co2 laser engraving machine laser engraver,5040 engraving machine DIY laser cutter laser marking machine
769.23 $
2022 Newest Free Ship Co2 laser engraving machine laser engraver,5040 engraving machine DIY laser cutter laser marking machine
0decorative imageratings
0decorative imageorders

Reliability – 89%

Seller LIAOCHENG JKJG LASER EQUIPMENT CO.,LTD Store
To the storeGo to store
co2 laser 50W 4060 laser engraving cutter machine marking machine mini laser cutter cnc router laser head diy
1 070 $
co2 laser 50W 4060 laser engraving cutter machine marking machine mini laser cutter cnc router laser head diy
1decorative imagerating
1decorative imageorder
5.0

Reliability – 89%

Seller HCZ Hauser's laser Store
To the storeGo to store

42 similar items found

Russia Free Shipping HCZ DSP 100W Laser engraving machine 6090 Laser cutter machine CO2 laser CNC cutting Machine USB Interface
1 588 – 1 944 $

Russia free shipping hcz dsp 100w laser engraving machine 6090 laser cutter machine co2 laser cnc cutting machine usb interface

3decorative image
1decorative image
Seller reliability 89%
Free shipping HCZ 100W CO2 laser cnc DPS 1060 laser engraving laser cutter machine marking machine mini laser engraver CNC DIY
1 620 – 1 976 $

Free shipping hcz 100w co2 laser cnc dps 1060 laser engraving laser cutter machine marking machine mini laser engraver cnc diy

1decorative image
1decorative image
Seller reliability 89%
Free shipping RDC5121 DSP Co2 laser engraving CNC laser machine, 5040 CO2 engraving machine laser cutter laser marking machine
964.00 $

Free shipping rdc5121 dsp co2 laser engraving cnc laser machine, 5040 co2 engraving machine laser cutter laser marking machine

0decorative image
0decorative image
Seller reliability 89%
Freeshipping New 4040 Co2 laser engraving machine cutter machine CNC laser engraver, DIY laser marking machine, carving machine
959.42 $

Freeshipping new 4040 co2 laser engraving machine cutter machine cnc laser engraver, diy laser marking machine, carving machine

0decorative image
0decorative image
Seller reliability 89%
Ruida DSP 60W 4060 co2 laser engraver co2 laser cutter machine CNC laser engraving machine laser marking machine
2 367 $

Ruida dsp 60w 4060 co2 laser engraver co2 laser cutter machine cnc laser engraving machine laser marking machine

1decorative image
0decorative image
Seller reliability 89%
Laser RECI 100w laser engraving machine SL-1080 co2 laser engraving machine 220V laser cutter machine diy CNC engraving machine-4%
4 965 $

Laser reci 100w laser engraving machine sl-1080 co2 laser engraving machine 220v laser cutter machine diy cnc engraving machine

0decorative image
0decorative image
Seller reliability 89%
Free shipping CNC laser cutting machine/laser engraver/CO2 laser cutter 4060/6040 for wood plywood engraving machine hot sale-7%
1 126 – 1 294 $

Free shipping cnc laser cutting machine/laser engraver/co2 laser cutter 4060/6040 for wood plywood engraving machine hot sale

0decorative image
0decorative image
Seller reliability 89%
1325 CNC co2 laser engraving machine laser cutting machine
Incomplete data
5 700 – 6 365 $

1325 cnc co2 laser engraving machine laser cutting machine

0decorative image
0decorative image
Seller reliability 0%
Free shipping 80w4060 co2 laser engraving machine, 220v110V CNC laser cutt machine, CNC engraving machine, laser marking machine-2%
1 192 $

Free shipping 80w4060 co2 laser engraving machine, 220v110v cnc laser cutt machine, cnc engraving machine, laser marking machine

0decorative image
0decorative image
Seller reliability 89%
Yaoneng 1390 Laser Cutting Engraving Machine Co2 Cnc Laser Cutter for Ruida Control System
Incomplete data
3 373 – 3 468 $

Yaoneng 1390 laser cutting engraving machine co2 cnc laser cutter for ruida control system

0decorative image
0decorative image
Seller reliability 0%
Stock!2022 Newest Co2 4040 50W laser engraving machine cutter machine laser engraver, DIY laser marking machine, carving machine
981.00 – 984.60 $

Stock!2022 newest co2 4040 50w laser engraving machine cutter machine laser engraver, diy laser marking machine, carving machine

0decorative image
1decorative image
Seller reliability 89%
Free shipping Quality 3020 power laser engraving machine,Co2 laser engraver 40w,industrial laser cutter,big power laser module
609.00 $

Free shipping quality 3020 power laser engraving machine,co2 laser engraver 40w,industrial laser cutter,big power laser module

0decorative image
1decorative image
Seller reliability 89%
LY CO2 Laser Cutter 60w 6040/4060 Engraving Machine with USB Support Honeycomb Laser Cutting and Engraving Machine-14%
1 332 – 2 224 $

Ly co2 laser cutter 60w 6040/4060 engraving machine with usb support honeycomb laser cutting and engraving machine

0decorative image
0decorative image
Seller reliability 85%
Russia Free Shipping HCZ DSP 100W Laser engraving machine 1060 Laser cutter Machine CO2 CNC cutting machine USB Interface
2 155 – 2 512 $

Russia free shipping hcz dsp 100w laser engraving machine 1060 laser cutter machine co2 cnc cutting machine usb interface

1decorative image
1decorative image
Seller reliability 89%
Free Shipping CO2 4040 50W CNC Laser Engraving Machine Cutter Machine Laser Engraver DIY Laser Marking Machine Carving Machine
1 062 $

Free shipping co2 4040 50w cnc laser engraving machine cutter machine laser engraver diy laser marking machine carving machine

0decorative image
0decorative image
Seller reliability 72%
Laser 4040 CO2 Engraving Cutting Marking Machine 50W CO2 Laser Engraver 40x40CM
1 474 $

Laser 4040 co2 engraving cutting marking machine 50w co2 laser engraver 40x40cm

0decorative image
0decorative image
Seller reliability 55%
80W 100W 1410 CO2 Laser Machine CNC Laser Cutter Cutting Machine
Incomplete data
3 057 – 3 197 $

80w 100w 1410 co2 laser machine cnc laser cutter cutting machine

0decorative image
0decorative image
Seller reliability 0%
mini DIY 50W CO2 laser cnc engraving machine LY 4040 cutter Super machine
1 463 $

Mini diy 50w co2 laser cnc engraving machine ly 4040 cutter super machine

0decorative image
0decorative image
Seller reliability 89%
CO2 Laser machine 1060 100W DSP Off Line Control Laser Cutter Engraving Machine with 100W Laser Tube&Cooller Chiller-5%
2 936 – 3 479 $

Co2 laser machine 1060 100w dsp off line control laser cutter engraving machine with 100w laser tube&cooller chiller

0decorative image
0decorative image
Seller reliability 85%
Free shipping 3020 50w Co2 Laser engraver machine,big power laser cutter engraving machine,DIY laser engraved chapter,Coreldraw-0.9%
585.81 – 589.26 $

Free shipping 3020 50w co2 laser engraver machine,big power laser cutter engraving machine,diy laser engraved chapter,coreldraw

0decorative image
0decorative image
Seller reliability 89%
1610 Cnc Laser Machine 100w Co2 Laser Engraving Cutting Machine-2%
Incomplete data
3 653 – 4 318 $

1610 cnc laser machine 100w co2 laser engraving cutting machine

0decorative image
0decorative image
Seller reliability 0%
Newest Co2 4040 50W laser engraving machine cutter machine laser engraver, DIY laser marking machine, carving machine
698.82 $

Newest co2 4040 50w laser engraving machine cutter machine laser engraver, diy laser marking machine, carving machine

0decorative image
0decorative image
Seller reliability 3%
1390 laser co2 100w high power laser engraving machine, laser cutter machine, laser marking machine, working size 1300 * 900mm-1%
2 640 – 3 226 $

1390 laser co2 100w high power laser engraving machine, laser cutter machine, laser marking machine, working size 1300 * 900mm

1decorative image
2decorative image
Seller reliability 89%
Freeshipping Quality 3020 power laser engraving machine,Co2 laser engraver 40w,industrial laser cutter,big power laser module-0.5%
515.43 $

Freeshipping quality 3020 power laser engraving machine,co2 laser engraver 40w,industrial laser cutter,big power laser module

0decorative image
0decorative image
Seller reliability 89%
1390 Laser Engraver Diy Cnc Co2 Laser Cutter Machine
Incomplete data
3 154 – 3 382 $

1390 laser engraver diy cnc co2 laser cutter machine

0decorative image
0decorative image
Seller reliability 0%
9060 CO2 Laser Engraving Machine Ruida RECI 6090 laser cutting machine 220v/110v laser marking machine diy CNC engraving machine-2%
1 955 – 2 191 $

9060 co2 laser engraving machine ruida reci 6090 laser cutting machine 220v/110v laser marking machine diy cnc engraving machine

3decorative image
2decorative image
3.7
Seller reliability 89%
CO2 Laser Engraving Cutting Machine 1610 Work Size CNC Router Laser Cutter Jean Paper Nonmetal Marking Machine auto liftting
Incomplete data
3 538 – 3 869 $

Co2 laser engraving cutting machine 1610 work size cnc router laser cutter jean paper nonmetal marking machine auto liftting

0decorative image
0decorative image
Seller reliability 0%
130W 1390 Compact Laser Engraver Laser Cutter Mdf Laser Cutting Machine Plexiglass Cutting Machine Co2 Laser CNC
Incomplete data
3 521 $

130w 1390 compact laser engraver laser cutter mdf laser cutting machine plexiglass cutting machine co2 laser cnc

0decorative image
0decorative image
Seller reliability 0%
1325 CO2 Laser Engrave Cutting Machine 100W Laser Cutter Engravers
Incomplete data
5 768 $

1325 co2 laser engrave cutting machine 100w laser cutter engravers

0decorative image
0decorative image
Seller reliability 0%
Hot Sale CO2 4040 50W CNC Laser Engraving Machine Cutter Machine Laser Engraver DIY Laser Marking Machine Carving Machine
1 122 $

Hot sale co2 4040 50w cnc laser engraving machine cutter machine laser engraver diy laser marking machine carving machine

0decorative image
0decorative image
Seller reliability 72%
Hot Sale CO2 4040 50W CNC Laser Engraving Machine Cutter Machine Laser Engraver DIY Laser Marking Machine Carving Machine
1 115 $

Hot sale co2 4040 50w cnc laser engraving machine cutter machine laser engraver diy laser marking machine carving machine

0decorative image
0decorative image
Seller reliability 15%
Hot Sale CO2 4040 50W CNC Laser Engraving Machine Cutter Machine Laser Engraver DIY Laser Marking Machine Carving Machine
Incomplete data
1 145 $

Hot sale co2 4040 50w cnc laser engraving machine cutter machine laser engraver diy laser marking machine carving machine

0decorative image
0decorative image
Seller reliability 0%
40W CO2 Laser Engraving Machine 3040 laser cutter machine can add rotary axis free DDP to RU
894.19 $

40w co2 laser engraving machine 3040 laser cutter machine can add rotary axis free ddp to ru

0decorative image
0decorative image
Seller reliability 89%
Free shipping mopa Fiber laser marking Machine co2 laser marking machine laser engraver metal diy cnc mach-12%
4 000 – 4 512 $

Free shipping mopa fiber laser marking machine co2 laser marking machine laser engraver metal diy cnc mach

0decorative image
0decorative image
Seller reliability 89%
1390 130W RUIDA Co2 Laser Engraving Machine 900*600mm Laser Cutter Engarver 110V/220V
Incomplete data
3 003 – 3 318 $

1390 130w ruida co2 laser engraving machine 900*600mm laser cutter engarver 110v/220v

0decorative image
0decorative image
Seller reliability 0%
CNC Laser Engraving Machine Mini Super with All functions 4040 50W CO2 Cutter
842.17 $

Cnc laser engraving machine mini super with all functions 4040 50w co2 cutter

0decorative image
0decorative image
Seller reliability 100%
CO2 Laser 60w Marble Stone Engraving Machine
Incomplete data
2 290 $

Co2 laser 60w marble stone engraving machine

0decorative image
0decorative image
Seller reliability 0%
Freeshipping Lowest price 40x40cm working area co2 50w wood laser engraving cutting machine for nameplates-5%
701.48 – 705.03 $

Freeshipping lowest price 40x40cm working area co2 50w wood laser engraving cutting machine for nameplates

0decorative image
0decorative image
Seller reliability 89%
60W CO2 Laser Engraving Machine USB Autofocus Laser Cutting Machine 220V CNC Laser Marking Engraving Machine 400*600mm-3%
1 408 $

60w co2 laser engraving machine usb autofocus laser cutting machine 220v cnc laser marking engraving machine 400*600mm

0decorative image
0decorative image
Seller reliability 15%
YOHUIE 20W laser metal engraving, 15000MW diy laser marking machine, wood router mini Stainless steel laser engraving machine
445.00 – 515.00 $

Yohuie 20w laser metal engraving, 15000mw diy laser marking machine, wood router mini stainless steel laser engraving machine

1decorative image
1decorative image
5.0
Seller reliability 72%
Desktop LY laser cutter 4040 50W CO2 Laser Engraving Machine with Digital Function and Honeycomb Table
893.32 $

Desktop ly laser cutter 4040 50w co2 laser engraving machine with digital function and honeycomb table

0decorative image
0decorative image
Seller reliability 89%
CNC 1390 Laser Engraver 130W 100W Co2 Laser Cutting Machine Engrave Machine
Incomplete data
3 450 – 3 521 $

Cnc 1390 laser engraver 130w 100w co2 laser cutting machine engrave machine

0decorative image
0decorative image
Seller reliability 0%
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - buy cheap
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - buy cheap
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine - compare prices
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine - specifications
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine - photo 2024
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine - photo 2024
1decorative imagerating
0decorative imageorders

Photos from buyers

Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - From the machine and did not expect something special, simple electronics, for the hobby will come. At the delivery, the box flew, the support of the table adjustment jumped inside, curled pulled no problem. It is very very very long, and very long, and very long, it is very very long, and very long, it is very very long, and it is, it is very very long, and it is, it is, it is, it is, it is, it is, it is, it is, it is, it is, it is, and it is, it is, and it is, and it is, it is, and it is very very very very Scotch)))) cooling is not necessarily just water, I put frozen bottles into the water. The air pump is weak, it is not critical, but for a better result it is necessary to change. The tractor body. Paid the seller for Customs sent 1.5 weeks. Probably arranged, delivery to Moscow for 3 weeks, to the House did not bring had to go 19km Moscow, there warehouse, to go to the car can not, the box is huge, let's say 500R for 50 meters. Next came another line says let's 300R for unloading. No papers nothing. In general delivery ahtung be ready. In general, except for the delivery is more and less Dear friend, it is caused by long delivery, a little worn out, sorry for it please tighten them, may be OK to adjust the light way, you can leave me your email address, I will send to you
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - From the machine and did not expect something special, simple electronics, for the hobby will come. At the delivery, the box flew, the support of the table adjustment jumped inside, curled pulled no problem. It is very very very long, and very long, and very long, it is very very long, and very long, it is very very long, and it is, it is very very long, and it is, it is, it is, it is, it is, it is, it is, it is, it is, it is, it is, and it is, it is, and it is, and it is, it is, and it is very very very very Scotch)))) cooling is not necessarily just water, I put frozen bottles into the water. The air pump is weak, it is not critical, but for a better result it is necessary to change. The tractor body. Paid the seller for Customs sent 1.5 weeks. Probably arranged, delivery to Moscow for 3 weeks, to the House did not bring had to go 19km Moscow, there warehouse, to go to the car can not, the box is huge, let's say 500R for 50 meters. Next came another line says let's 300R for unloading. No papers nothing. In general delivery ahtung be ready. In general, except for the delivery is more and less Dear friend, it is caused by long delivery, a little worn out, sorry for it please tighten them, may be OK to adjust the light way, you can leave me your email address, I will send to you
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - From the machine and did not expect something special, simple electronics, for the hobby will come. At the delivery, the box flew, the support of the table adjustment jumped inside, curled pulled no problem. It is very very very long, and very long, and very long, it is very very long, and very long, it is very very long, and it is, it is very very long, and it is, it is, it is, it is, it is, it is, it is, it is, it is, it is, it is, and it is, it is, and it is, and it is, it is, and it is very very very very Scotch)))) cooling is not necessarily just water, I put frozen bottles into the water. The air pump is weak, it is not critical, but for a better result it is necessary to change. The tractor body. Paid the seller for Customs sent 1.5 weeks. Probably arranged, delivery to Moscow for 3 weeks, to the House did not bring had to go 19km Moscow, there warehouse, to go to the car can not, the box is huge, let's say 500R for 50 meters. Next came another line says let's 300R for unloading. No papers nothing. In general delivery ahtung be ready. In general, except for the delivery is more and less Dear friend, it is caused by long delivery, a little worn out, sorry for it please tighten them, may be OK to adjust the light way, you can leave me your email address, I will send to you
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - From the machine and did not expect something special, simple electronics, for the hobby will come. At the delivery, the box flew, the support of the table adjustment jumped inside, curled pulled no problem. It is very very very long, and very long, and very long, it is very very long, and very long, it is very very long, and it is, it is very very long, and it is, it is, it is, it is, it is, it is, it is, it is, it is, it is, it is, and it is, it is, and it is, and it is, it is, and it is very very very very Scotch)))) cooling is not necessarily just water, I put frozen bottles into the water. The air pump is weak, it is not critical, but for a better result it is necessary to change. The tractor body. Paid the seller for Customs sent 1.5 weeks. Probably arranged, delivery to Moscow for 3 weeks, to the House did not bring had to go 19km Moscow, there warehouse, to go to the car can not, the box is huge, let's say 500R for 50 meters. Next came another line says let's 300R for unloading. No papers nothing. In general delivery ahtung be ready. In general, except for the delivery is more and less Dear friend, it is caused by long delivery, a little worn out, sorry for it please tighten them, may be OK to adjust the light way, you can leave me your email address, I will send to you
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - From the machine and did not expect something special, simple electronics, for the hobby will come. At the delivery, the box flew, the support of the table adjustment jumped inside, curled pulled no problem. It is very very very long, and very long, and very long, it is very very long, and very long, it is very very long, and it is, it is very very long, and it is, it is, it is, it is, it is, it is, it is, it is, it is, it is, it is, and it is, it is, and it is, and it is, it is, and it is very very very very Scotch)))) cooling is not necessarily just water, I put frozen bottles into the water. The air pump is weak, it is not critical, but for a better result it is necessary to change. The tractor body. Paid the seller for Customs sent 1.5 weeks. Probably arranged, delivery to Moscow for 3 weeks, to the House did not bring had to go 19km Moscow, there warehouse, to go to the car can not, the box is huge, let's say 500R for 50 meters. Next came another line says let's 300R for unloading. No papers nothing. In general delivery ahtung be ready. In general, except for the delivery is more and less Dear friend, it is caused by long delivery, a little worn out, sorry for it please tighten them, may be OK to adjust the light way, you can leave me your email address, I will send to you
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - From the machine and did not expect something special, simple electronics, for the hobby will come. At the delivery, the box flew, the support of the table adjustment jumped inside, curled pulled no problem. It is very very very long, and very long, and very long, it is very very long, and very long, it is very very long, and it is, it is very very long, and it is, it is, it is, it is, it is, it is, it is, it is, it is, it is, it is, and it is, it is, and it is, and it is, it is, and it is very very very very Scotch)))) cooling is not necessarily just water, I put frozen bottles into the water. The air pump is weak, it is not critical, but for a better result it is necessary to change. The tractor body. Paid the seller for Customs sent 1.5 weeks. Probably arranged, delivery to Moscow for 3 weeks, to the House did not bring had to go 19km Moscow, there warehouse, to go to the car can not, the box is huge, let's say 500R for 50 meters. Next came another line says let's 300R for unloading. No papers nothing. In general delivery ahtung be ready. In general, except for the delivery is more and less Dear friend, it is caused by long delivery, a little worn out, sorry for it please tighten them, may be OK to adjust the light way, you can leave me your email address, I will send to you
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The machine came in 28 days! Everything works, everything! The seller sent himself, did not pay anything! It's all possible! Delivery was Baikal service! Packed well! No damage! Order boldly! Recommend!
Freeshipping Co2 laser engraving machine cnc laser ,5040 engraving machine CO2 laser cutter laser marking machine 2024 - The machine came in 28 days! Everything works, everything! The seller sent himself, did not pay anything! It's all possible! Delivery was Baikal service! Packed well! No damage! Order boldly! Recommend!
+64
All photos

Product specifications

  • Brand Name: HAUSER
  • Origin: CN(Origin)
  • Certification: CE
  • Condition: New
  • CNC or Not: CNC
Show all